Product Description
he Door Frame Metal production line includes manual decoiler,feeding device,leveling device,puchiing device,incising device,main roll forming machine,pressing device,hydraulic cutter,automatic ,hydraulic station and PLC control system.
| Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| Thickness of coil sheet | 0.2-0.8mm |
| Coil width | 100mm |
| Cover width | 80m |
| Material of main frame | 300H steel |
| Diameter of Soild shaft | 45mm, high grade 45# steel |
| Roller | Quenched and tempered treatment, |
| hard chrome coated 0.05-0.07mm |
| Thickness of middle plate | 16mm |
| Forming station | 16stations |
| Drive type | By chain(1.0 inch) link bearing model 6210 |
| Power of main motor | 5.5kw with Cycloidal reducer |
| Power of pump station | 4kw |
| Forming speed | About 8-10m/min |
| Hydraulic cutting | Controlled by PLC |
| PLC | DELTA(TAIWAN)/Mitsubishi |
| Material of razor blades | Cr 12, quenching 58-62℃ |
| Frequency converter | It has the advantage of slowing down before cutting, to ensure the |
| length accuracy(±1mm, far better than industrial standard ±3mm). |
| Switch | CHNT |
MATERIAL:
(1) Steel thickness: 0.5mm~2.0mm
(2) Coil width: about 130mm~220mm
(3) Raw material: galvanized steel
(4) Yield strength: about 235Mpa
(5) Forming station: about 12 station
(6) Rollers material: GCr15,
(7) Line speed: about 15m/min.
(8) Power supply: 380V/50HZ
(9) Motor power: 7.5kw
(10) Hydraulic pressure: 16 Mpa
Production Process:
Un-coil----roll forming----saw cutting----outlet finished product
Production line components:
(1) 3 Tons Hydraulic Un-coiler 1 set
(2) Roll-Forming M/C 1 set
(3) Saw cutter 1 set
(4) Product Rack (un-powered) 1 set
(5) PLC Control System 1 set
Line speed:10 m/min.
Product Tags:
|
|
Aluminum Metal Steel Door Frame Roll Forming making Machine Door Frame Making Machine Images
|
